www.ritlabs.com [Topic: Long start time for 10.5.x] http://www.ritlabs.com New posts in Long start time for 10.5.x of forum at www.ritlabs.com [www.ritlabs.com] en http://backend.userland.com/rss2 Thu, 07 Dec 2023 12:07:11 +0200 Long start time for 10.5.x Long start time for 10.5.x in forum The Bat! - Configuring the E-mail Client.
Thank you all for your suggestions, You solved one of my problems also, thank you so much again.  I started using WritingUniverse https://writinguniverse.com/pay-for-research-paper/ because a friend suggested it. I was swamped with assignments and deadlines, so I thought I'd give it a try. Paying for research papers has been a game changer for me. Not only did it save me time, but it also guaranteed high-quality research papers. Now I can spend my free time doing what I love without worrying about deadlines. I highly recommend writing with WritingUniverse!
07 December 2023 12:07:11, Constance Schneider.]]> http://www.ritlabs.com/en/forums/forum4/topic16176/message56037/ http://www.ritlabs.com/en/forums/forum4/topic16176/message56037/ Thu, 07 Dec 2023 12:07:11 +0200 The Bat! - Configuring the E-mail Client Long start time for 10.5.x Long start time for 10.5.x in forum The Bat! - Configuring the E-mail Client.
One more suggestion from me (this I learned from support): try running TB with the /reg:someprofilename command-line option which will use a clean slate of registry values. If TB runs normally there could be some conflict between old/new registry settings, and in this case a complete uninstall and reinstall may help.

(To continue using TB normally running it with the /reg option, you will need to configure many things again. Using the /reg option cannot break anything - deleting the option will revert to using the original registry settings.)
26 October 2023 16:05:07, Miloš Radovanović.]]> http://www.ritlabs.com/en/forums/forum4/topic16176/message55769/ http://www.ritlabs.com/en/forums/forum4/topic16176/message55769/ Thu, 26 Oct 2023 16:05:07 +0300 The Bat! - Configuring the E-mail Client Long start time for 10.5.x Long start time for 10.5.x in forum The Bat! - Configuring the E-mail Client.
Maybe some other users will come up with suggestions, but I think your best bet at this point would be to contact Ritlabs' helpdesk using the Support menu at the top of this page.
25 October 2023 21:32:23, Daniel van Rooijen.]]> http://www.ritlabs.com/en/forums/forum4/topic16176/message55766/ http://www.ritlabs.com/en/forums/forum4/topic16176/message55766/ Wed, 25 Oct 2023 21:32:23 +0300 The Bat! - Configuring the E-mail Client Long start time for 10.5.x Long start time for 10.5.x in forum The Bat! - Configuring the E-mail Client.

====quote====
- Open a command prompt ('DOS box' if you're an old timer), go to your The Bat folder, and run TheBat64.exe with these commandline parameters: /NoDirectX /ForceNoCEF. Does it work better then?
=============
Not much, maybe 5 sec faster than w/o


====quote====
- Could it be that your antivirus is taking a long time scanning and releasing the (new) TheBat executables?
=============
When the antivirus is disabled still issue persists


====quote====
- Could The Bat or your antivirus be accessing any very slow drives (e.g. sleeping drives, network drives) ?
=============
As I have written in the OP - all is on the local M.2 drive


====quote====
- Have you tried running The Bat elevated? (Right-click on The Bat desktop shortcut,then  'Run as Administrator') ?
=============
No difference


====quote====
- When it has finally launched, does it operate normally? (I'm not sure what is meant by 'messages are bland').
=============
It was a typo - sometimes it came up with blank messages (no content)


====quote====
- Have you used the Maintenance Center (see Folder menu) to Check/Repair the message base? (only do this if you have a backup).
=============
Yeah, I have done that before posting my issue to the forum.


====quote====
The delay that you're seeing may be related to the problem discussed here: https://www.ritlabs.com/en/forums/forum4/topic16064/
=============
It may but my case is to load the application rather than just delay on rendering windows like replay composition.  
24 October 2023 16:53:10, Adam Raszkiewicz.]]> http://www.ritlabs.com/en/forums/forum4/topic16176/message55763/ http://www.ritlabs.com/en/forums/forum4/topic16176/message55763/ Tue, 24 Oct 2023 16:53:10 +0300 The Bat! - Configuring the E-mail Client Long start time for 10.5.x Long start time for 10.5.x in forum The Bat! - Configuring the E-mail Client.
Just some thoughts and suggestions..:

- Open a command prompt ('DOS box' if you're an old timer), go to your The Bat folder, and run TheBat64.exe with these commandline parameters: /NoDirectX /ForceNoCEF. Does it work better then?

- Could it be that your antivirus is taking a long time scanning and releasing the (new) TheBat executables?

- Could The Bat or your antivirus be accessing any very slow drives (e.g. sleeping drives, network drives) ?

- Have you tried running The Bat elevated? (Right-click on The Bat desktop shortcut,then  'Run as Administrator') ?

- When it has finally launched, does it operate normally? (I'm not sure what is meant by 'messages are bland').

- Have you used the Maintenance Center (see Folder menu) to Check/Repair the message base? (only do this if you have a backup).


The delay that you're seeing may be related to the problem discussed here: https://www.ritlabs.com/en/forums/forum4/topic16064/
24 October 2023 16:24:28, Daniel van Rooijen.]]> http://www.ritlabs.com/en/forums/forum4/topic16176/message55762/ http://www.ritlabs.com/en/forums/forum4/topic16176/message55762/ Tue, 24 Oct 2023 16:24:28 +0300 The Bat! - Configuring the E-mail Client Long start time for 10.5.x Long start time for 10.5.x in forum The Bat! - Configuring the E-mail Client.
After upgrading The Bat to the version 10.5.x (64bit on Windows 10) I'm getting a long start time of the application (30 sec and more) and sometimes messages are blank (no content) after starting so I need to restart again. The Bat App Data folder resides on M.2 disk.

Windows Event Log shows a bunch of errors for the application which looks like ====code==== 
Fault bucket 1385311441497998246, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: TheBat64.exe
P2: 10.5.1.0
P3: 652ea157
P4: TheBat64.exe
P5: 10.5.1.0
P6: 652ea157
P7: c0000005
P8: 0000000000013a2e
P9: 
P10: 

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER229A.tmp.WERInternalMetadata.xml

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_TheBat64.exe_374c9edfecade2faf7cfcc903078baae0ee_3673a601_e9beed6a-14e9-4d4c-b88a-9e8cf7342c3f

Analysis symbol: 
Rechecking for solution: 0
Report Id: 6d21e08b-ba8f-4bc7-86d9-dbbb42213f16
Report Status: 268435456
Hashed bucket: dc7f311157c955d963399d6a95c5c3a6
Cab Guid: 0
============= ====code==== 
Faulting application name: TheBat64.exe, version: 10.5.1.0, time stamp: 0x652ea157
Faulting module name: TheBat64.exe, version: 10.5.1.0, time stamp: 0x652ea157
Exception code: 0xc0000005
Fault offset: 0x0000000000013a2e
Faulting process id: 0x3324
Faulting application start time: 0x01da06755aa22f5a
Faulting application path: D:\Program Files\The Bat!\TheBat64.exe
Faulting module path: D:\Program Files\The Bat!\TheBat64.exe
Report Id: 6d21e08b-ba8f-4bc7-86d9-dbbb42213f16
Faulting package full name: 
Faulting package-relative application ID:
============= ====code==== 
Faulting application name: TheBat64.exe, version: 10.5.1.0, time stamp: 0x652ea157
Faulting module name: TheBat64.exe, version: 10.5.1.0, time stamp: 0x652ea157
Exception code: 0xc0000005
Fault offset: 0x0000000000013a2e
Faulting process id: 0x4b88
Faulting application start time: 0x01da06748d0a6c40
Faulting application path: D:\Program Files\The Bat!\TheBat64.exe
Faulting module path: D:\Program Files\The Bat!\TheBat64.exe
Report Id: 961270e5-c582-4518-a50a-55638310db38
Faulting package full name: 
Faulting package-relative application ID:
============= ====code==== 
Faulting application name: TheBat64.exe, version: 10.5.1.0, time stamp: 0x652ea157
Faulting module name: TheBat64.exe, version: 10.5.1.0, time stamp: 0x652ea157
Exception code: 0xc0000005
Fault offset: 0x0000000000010b59
Faulting process id: 0x21d8
Faulting application start time: 0x01da0674f929532f
Faulting application path: D:\Program Files\The Bat!\TheBat64.exe
Faulting module path: D:\Program Files\The Bat!\TheBat64.exe
Report Id: 83d64fad-d603-4a56-9693-a8727ee9ad99
Faulting package full name: 
Faulting package-relative application ID:
=============
24 October 2023 15:38:43, Adam Raszkiewicz.]]> http://www.ritlabs.com/en/forums/forum4/topic16176/message55761/ http://www.ritlabs.com/en/forums/forum4/topic16176/message55761/ Tue, 24 Oct 2023 15:38:43 +0300 The Bat! - Configuring the E-mail Client